GE Vernova
GE Frame 5 MS5001N Heavy-Duty Gas Turbine — 24.6 MW
Used GE Frame 5 (MS5001N) heavy-duty gas turbine for sale — a 24.6 MW single-shaft frame, often packaged for peaking, and upratable with GE’s P N/T kit.
Used GE Frame 5 MS5001N heavy-duty gas turbine available through Pantheon. Shipped from 1970 to 1972, the N introduced the 17-stage “P” compressor and is rated 24.6 MW at a 12,190 Btu/kWh heat rate and 1,730 °F firing temperature. GE describes the later MS5001P as very similar to the N: the two share the compressor, stage-2 wheel, hot-gas-path design and 5,100 rpm shaft speed. The generator is driven through a load gear, so Frame 5 units were built for both 50 and 60 Hz service. GE’s P N/T uprate kit fits both the N and the P and lifts a pre-1978 unit to about 25.2 MW. The 1987 and later MS5001PA is rated 26.3–26.8 MW. Exact rating, hours, and configuration confirmed at quote.
Specifications
| Type | Heavy-duty gas turbine (single-shaft) |
|---|---|
| Output | 24.6 MW |
| Heat rate | 12,190 Btu/kWh |
| Firing temperature | 1,730 °F |
| Compressor | 17-stage “P” compressor, introduced on the N in 1970 |
| Shaft speed | 5,100 rpm · generator through a load gear |
| Frequency | 50 or 60 Hz, by load gear |
| Uprate | GE P N/T kit (FT3M) fits N and P · ~25.2 MW on pre-1978 units |
| Frame 5 line | MS5001P 23.4–24.6 MW · MS5001PA 26.3–26.8 MW |
| Condition | Used |
Specifications shown are headline figures. Confirm full configuration details when you request a quote.
Last updated
Request a quote for GE Frame 5 (MS5001N) Gas Turbine
Tell us your requirements and we'll get back to you with availability and pricing.
or reach us directly at